Lab dips and dye lots: why your repeat order may not match
How color is approved before production, why the same color can shift between orders, and how to plan a repeat range so the shade stays consistent.
Color is the part of a garment that most often causes a dispute, and almost every dispute traces back to one of two things: a color approved on a screen, or a repeat order placed without checking the dye lot.
Color is approved on cloth, not on screen
A lab dip is a small piece of your fabric dyed to the target color and sent for approval. It exists because a hex code on a monitor, a Pantone reference and a dyed piece of cotton poplin are three different things — the fabric’s fibre, weight and finish all shift the result.
Practical rule: approve from the physical lab dip, in daylight if you can, and say which Pantone reference it was matched against. Keep the approved dip. It becomes the standard that the bulk fabric is checked against.
Custom fabric means dyeing, which means time
If the fabric has to be produced or dyed to your color, that work happens before garment production starts: roughly 15–45 days depending on the mill and the color. Building this into the calendar is the difference between a season and a missed window.
Stock fabric comes in dye lots
A stock fabric does not need dyeing, which removes both the minimum and the wait — that is why it is the usual choice for a first order. The trade-off is that the mill dyes it in batches, and shade can vary slightly between dye lots. Two orders of “the same” white poplin, placed months apart, can sit next to each other and not read as the same white.
This is worth knowing before you promise a retailer that a repeat will be an exact match.
How to keep a range consistent
- Plan the second order with the first. If a style is likely to repeat, reserve enough of the same dye lot to cover the next run rather than buying it twice.
- Do not split one color across lots. If a color is critical and the quantity is large, ask what is available in a single lot before confirming the order.
- Approve a physical standard and keep it. A hanger sample in the approved fabric is the reference for every later check.
- Decide what “close enough” means. For a print or a seasonal color, a small variation may be acceptable; for a core white or navy that sits next to last season’s stock, it usually is not.
Where this fits in development
Fabric and color decisions happen alongside sampling, not after it — the garment’s sample is made in the fabric you will actually sell. If the fabric is still open when sampling starts, the sample answers fit questions but not the ones about how the final cloth behaves.
Sourcing a fabric or approving a color? Send the reference and the target in the RFQ form, or read about fabrics and details and the production calendar.